Getting Your SIPA or Sidel Heaters Back Up to Speed
Let’s be honest: nobody likes it when a heating lamp goes out in the middle of a run. It’s a headache. And the last thing you want is to spend your afternoon fighting with a replacement part that almost fits, but not quite. That’s why we built our replacement series. We wanted something that just works. Whether you’re running the old-school SIPA SBO lines, the newer Matrix series, or anything from the Sidel catalog, these are designed to slide right in. No tinkering required. When we say “drop-in,” we mean it. You won’t have to rewire your machine or mess around with the lamp holders. We’ve matched the footprints exactly. And we’re careful with the power. Whether your setup is 230V or 400V, we nail the wattage. Why? Because if it’s too low, you get those annoying thin walls and uneven heating. Too high? You’re scorching your plastic. We hit that sweet spot so you don’t have to guess. The nitty-gritty stuff We use high-purity quartz glass. It’s tough. It doesn’t warp when things get hot. Plus, we use specific coatings that push the heat into the PET preform wall instead of just baking the surface. It’s a subtle difference that makes a huge difference in your final bottle. We also obsessed over the connectors—the R7s and Sk15 types. We kept the tolerances tight. In a high-vibration environment, loose connectors lead to arcing, and arcing kills lamps. We fixed that. A quick tip for the floor The best part is that you don’t have to touch your PLC settings or modify the chassis. You just swap them and get back to work. But here’s a heads-up: if you’re using high-output lamps to squeeze out faster cycle speeds, your cooling fans are going to work harder.**Check your blower filters.**If they’re clogged with dust, the oven overheats, and your expensive quartz envelopes will burn out way faster than they should. Keep the filters clean, and these lamps will take care of you.